Welcome to Parking Alert Sign (PASS)
Alley and small facility exit warning sign and system
Ideal for Alleys and small Apartment buildings systems. Warns pedestrians of a vehicle exiting a small parking facility with Voice Alert and Flashing CAR COMING text.
The CAR – alley exit sign is three sided and is designed to wall or post mount near sidewalks and pathways to warn pedestrians and street traffic. The sign includes a fully-engineered control system to detect vehicles and activate the sign for a duration timer. The sign has a volume controlled voice alert. The sign is all-weather and wall mounted and is made of 12AWG steel and powder coated a beautiful hammered copper that is architecturally pleasing for your facility.
A TRIGGERING SENSOR (see list below) detects a vehicle exiting a parking facility. It sends a signal to the PASS Controller (PSC) located inside the Sign.
The PASS Controller (PSC) activates the system:
Voice Alert—”Attention! Vehicles exiting watch for vehicles.”
Flashing text (3 sides) – CAR
Flashing amber signal
PASS Controller continues to activate the sign for 10 seconds (adjustable) or if a second vehicle activates the system it resets the 10 second timer. After the Timer has expired the Audio and Flashing alerts stop.
Important Note: If nearby residential is disturbed by the audio alert we can see Audio Cut-Off Timer below3
Part name: Car – Alley Exit Wall Mounted 18×07
Part numbers: CARV4007W or CARV4007W-Kit
Mounting: Wall or Post, outdoor rated
Purpose: Provides pedestrians a visual and voice alert when vehicles exit a parking facility. Three sides flash “CAR”.
Engineered Kit Includes:
PASS Controller w/ Voice Module
Power supply
Speaker
Vehicle motion detector
Dimensions: 18”H x 06”W x 07”D
Finish: Hammered copper powder coating
For quick purchase visit ParkingAlertSigns.com
OR
Visit our Quote page or email Support@PassSigns.com or CALL US
4 STEPS to Purchase with a Quote:
I have nearby residential, is there a way to turn off the sound at night?
Yes! We can install a Timer Board that turns off the Voice Alert at a designated time. Example turn off at 10pm and turn back on at 7am. It is easy enough for you to change the times yourself.
Do you do installations?
No we do not. We work with your installation company to ensure a smooth installation. Most of our customers use their parking, alarm, electrician, or maintenance personnel to install. We make it easy to install.
How do I buy one of these?
See the HOW TO PURCHASE tab
I have a very wide exit and can I put a sign on either side?
Yes we call this a Tandem System. We recommend if you have two or more lanes exiting, you should add another sign body. The key here is that only one sign needs a control board. This will allow both signs flashing and audio to synch with each other.
Can I change the Audio Alert Message?
Yep. The audio is stored on our VM-1 Audio Board. The VM-1 has a micro usb connection (android phone cable). You can record your own MP3 file and label 001.mp3 then connect to the VM-1 and replace the existing file. We recommend keep the message around 5 seconds. The board will replay the sound file for as long as the sign is active.
How does the sign detect a car?
The sign itself does not detect a car. A Triggering Device is connected to the sign. Usually a Triggering Device is either a parking gate, roll-up door, vehicle sensor, or motion detector. Look under the accessories tab for some choice. We can design it up for you so there is no guess work. Send us some pictures of your exit lanes.
BEST - - - This motion detector will ignore pedestrians and will only activate when a vehicle is traveling in a certain direction like exiting.
Minimal labor for installation.
Pricing $320
Good - - - This motion detector mounts on the ceiling and will detect any motion below it. Good for vehicle only areas.
Minimal labor for installation.
Pricing $100
Great - - - Loop Detectors are great at detecting vehicles and ignoring pedestrians, however, they are the most labor intensive for installations.
Expensive labor for installation.
Pricing $100
Fair - - - Beam Detectors are great at detecting vehicles, however they are not good for dual directions lanes and they will detect pedestrians.
Minimal labor for installation.
Pricing $100
Cutoff the Voice or Audio alert at designated times with this simple timer. PASS will pre-wire it into your system. The Timer is 24/7 / 365 days so weekends can have different cutoff time the weekdays.
Pricing $180
Great Idea - - - When you have a very short exit to sidewalk distance this sign will flash to STOP drivers exiting the parking lanes.
Minimal labor for installation.
Pricing $250
This post is 72"x4"x4" and is used when wall mounting is not available. It is 12AWG steel and will last for decades. It is powder coated black.
Pricing $480
Intelligent Warning Systems for parking facilities
For Product Support or Quotes :
Support@PassSigns.com
–480–689–1993–
Most of PASS Signs products are made right here in Phoenix, AZ using local vendors and employees.
