Controls 2-way traffic in a parking facilities to prevent vehicle collisions with an intelligent queuing system.
The Two-Way Traffic Control Kit- uses (2) Red/Green 2-in-1 traffic lights, a Pass Signs Central Controller, and (2) Directional-logic Motion Detectors to stop and control traffic inside parking garage areas where cross traffic creates a dangerous scenario. Additional Signs, Lights, and Motion Detectors can be added to the system. When one of the Motion Detectors detects traffic entering the danger zone, the Controller will activate the red traffic light on the opposite side for a set time such as 10 seconds. If during that time a car is detected on the opposite side, the vehicle will be queued into the system, after the timer has expired the system will reverse the traffic lights allowing traffic to flow the other direction.
Part name: Two-way Traffic Control - RG1010-2WAY
Part#: RG1010LA1-12V-2WAY
Mounting: Wall or Post mounted, 40” clearance under
Dimensions: 10”H x 10”W x 6D”
Material: Polycarbonate
Finish: Black polycarbonate
Power In: 100-240VAC, Other options available
Input power for PSC-Controller
(4) Programmable 12VDC outputs (Flashing or constant)
(2) Programmable dry inputs, (NO or NC)
Activation timer - 5 to 60 seconds
Audio cut-off timer
Audio module for voice or audio alerts, MP3 files
Volume dial - 0 to 90dB
Audio cut-off timer to silence audio at designated times
Normal Status:
Direction 1 - Green light
Direction 2 - Green light
Direction 1 detection - Operations
When a vehicle is detected entering by the Direction 1 motion detector, the PSC Two-way Controller will start the Activation Timer for 10 seconds (programmable). The system will start to flash the Direction 2 Red Light while keeping the Direction 1 Green light on for the duration of the Activation Timer.
Direction 1 - Green light
Direction 2 - Red light flashing
• IF a another vehicle is detected by the Direction 1 motion detector during the activation timer, then the system will restart the Activation Timer and maintain the present direction.
• IF a vehicle is detected by the Direction 2 motion detector during the Activation Timer, then the system will queue the vehicle, and activate Direction 2 detection Operations after the Direction 1 traffic has cleared.
• IF no other vehicles are detected during the Activation Timer, then the system will return to Normal Status.
Direction 2 detection - Operations
Direction 2 Operations is the exact opposite of Direction 1 Operations.
Most of PASS Signs products are made right here in Phoenix, AZ using local vendors and employees.
