Pedestrian Crossing Sign – 3 Sided

Solution

Warns vehicles that a pedestrian has been detected and is crossing in the area or as a 24/7 flashing sign to alert of a pedestrian crosswalk

Description

Pedestrian Crossing 3606 (PED XING) sign is a 3-sided sign designed to be wall, column, or post mounted and can be well seen in multiple directions by vehicles. The sign can be configured into two different formats. Configuration 1 – Pedestrian motion detectors can send signals to the PSC Controller, inside the sign, to activate the sign for a designated timer when a pedestrian approaches a crosswalk. This will warn vehicles only when a pedestrian is in the area. Configuration 2 – The sign can flash 24/7 to warn vehicles of a pedestrian crosswalk.

We sell direct!

Need help? We will design your system for you.

Free shipping in US over $500

2 Year Warranty

Pedestrain crosswalk with flashing text and voice alert system

Pedestrian Crossing Warning Signs with flashing and voice

Training videos

Part name: PED XING 3606 3-Sided
Part#: PX3606W3-KIT (see Kits below)
Sides: 3-Sides
Mounting: Wall or Post mounted, special ceiling mounts
Dimensions: 36”H x 6”W x 7D”
Material: 14AWG Steel, Weatherproof
Finish: Hammered copper textured powder coating
Power In: 100-240VAC, Other options available

PASS Signs Controller (PSC) inside

Input power for PSC-Controller
(4) Programmable 12VDC outputs (Flashing or constant)
(2) Programmable dry inputs, (NO or NC)
Activation timer - 5 to 60 seconds
Audio cut-off timer
Audio module for voice or audio alerts, MP3 files
Volume dial - 0 to 90dB
Audio cut-off timer to silence audio at designated times

Operations

Configuration 1: A Pedestrian sensor detects a pedestrian approaching a crosswalk area. It sends a signal to the PASS Controller (PSC) inside the System.
The PASS Controller (PSC) activates the system:
• Audio Alert - Optional chime
• Flashing text (3 sides) - PED XING
PASS Controller continues to activate the sign for 10 seconds (adjustable) or if a second pedestrian activates the system it resets the 10 second timer.
Configuration 2: The sign can activate as a 24/7 flashing sign to show where pedestrian crosswalk are.

Audio cut-off timer - The PSC has a programmable audio cut-off timer to allow for the audio alert to be silenced at designated times to not disturb nearby residential (example 8pm to 8am)

PX3606W3-KIT

PED XING 3606 KIT (no trigger sensor or accessories)

Notes: You provide sensor or output from your gate or door

PED XING Sign - with PSC Controller, Speaker, and Power supply

SL12

Stop and Look 12" Sign

12" Stop and Look sign to stop traffic before exiting facility

Includes backbox for electrical connections and mounting

Red LED flasher to gain attention

Free Shipping over $500

For Warranty and Return information click here

I have nearby residential, is there a way to turn off the sound at night?

Yes! We can install a Timer Board that turns off the Voice Alert at a designated time. Example turn off at 10pm and turn back on at 7am. It is easy enough for you to change the times yourself.

Do you do installations?

No we do not. We work with your installation company to ensure a smooth installation. Most of our customers use their parking, alarm, electrician, or maintenance personnel to install. We make it easy to install.

How do I buy one of these?

See the purchasing area below.

I have a very wide exit and can I put a sign on either side?

Yes we call this a Tandem System. We recommend if you have two or more lanes exiting, you should add another sign body. The key here is that only one sign needs a control board. This will allow both signs flashing and audio to synch with each other.

Can I change the Audio Alert Message?

Yep. The audio is stored on our VM-1 Audio Board. The VM-1 has a micro usb connection (android phone cable). You can record your own MP3 file and label 001.mp3 then connect to the VM-1 and replace the existing file. We recommend keep the message around 5 seconds. The board will replay the sound file for as long as the sign is active.

How does the sign detect a car?

The sign itself does not detect a car. A Triggering Device is connected to the sign. Usually a Triggering Device is either a parking gate, roll-up door, vehicle sensor, or motion detector. Look under the accessories tab for some choice. We can design it up for you so there is no guess work. Send us some pictures of your exit lanes.

STEP 1: CHOOSE SINGLE OR DUAL SIGNS (choose 1)

PX3606W3-KIT, PED XING Sign with PSC5 Controller, Speaker, Power supply (+$0.00)

STEP 2: CHOOSE YOUR TRIGGER DEVICE

PS-VMD-DL, Decider2 Intelligent motion detector with directional logic (BEST) (+$265.00)

PS-VMD-NB, Narrow band motion detector (+$80.00)

PS-VMD-OP80, Motion Detector 80x10 field for long distance, will detect pedestrians (+$180.00)

PS-LD1, Loop Detector, in ground will detect only vehicles (does not include loop wire) (+$80.00)

Select a trigger or triggers to activate your sign. If you need more than a single unit please add to cart from that Triggers product page.

STEP 3: CHOOSE YOUR ACCESSORIES

SL12 - Stop and Look 12" flashing sign with mounting back box and red leds (+$310.00)

PS-Post72 - Post 72", 4x4 aluminum high strength with mounting plate, powder coated black, great quality (+$750.00)

Product total

Options total

Grand total

Pedestrian Crossing Sign – 3 Sided

Solution

Description

Training videos

Specifications

Documentation

Engineered Kits

Sensors & Triggers

Accessories

FAQs

PASS Signs Controller (PSC) inside

Operations

Free Shipping over $500

For Warranty and Return information click here

Related Products

About Us

Quick Links

Categories

Contact Us