Warning with flashing LED and audio alert
Warns pedestrians or vehicles of the danger of a car coming down a ramp of a parking facility using a flashing visual and audio warning.
The CAR COMING DOWN RAMP warning sign is single sided or dual sided and is designed to wall or post mount near the exit of a down ramp inside a parking garage. It is designed to warn pedestrians and cars. The sign includes a fully-engineered control system to detect vehicles and activate the sign for a duration timer. The Back Box of the sign is designed to house the controller including a Control Board, Power Supply, and Speaker. The Back Box is 12AWG steel that is powder coated grey.
A TRIGGERING SENSOR (see list below) detects a vehicle traveling down a parking ramp. It sends a signal to the PASS Controller (PSC) located inside the Sign.
The PASS Controller (PSC) activates the system:
Voice Alert—”Attention! Vehicles moving.”
Flashing amber signal
PASS Controller continues to activate the sign for 10 seconds (adjustable) or if a second vehicle activates the system it resets the 10 second timer. After the Timer has expired the Audio and Flashing alerts stop.
Important Note: If nearby residential is disturbed by the audio alert we can see Audio Cut-Off Timer below.
Part name: Car Coming Down Ramp Warning Sign
Part numbers: CCDR18W-KIT, CCDR24W-KIT, CCDR36W-KIT
Mounting: Wall or Post, outdoor rated
Purpose: Warns vehicles and pedestrians of a car coming down a ramp
Engineered Kit Includes:
PASS Controller w/ Voice Module
Power supply
Speaker
Vehicle motion detector
Dimensions: 18″x18″, 24″x24″, 36″x36″
Finish: Stainless steel and Vinyl, back box powder coated grey
For quick purchase visit ParkingAlertSigns.com
OR
Visit our Quote page or email Support@PassSigns.com or CALL US
4 STEPS to Purchase with a Quote:
I have nearby residential, is there a way to turn off the sound at night?
Yes! We can install a Timer Board that turns off the Voice Alert at a designated time. Example turn off at 10pm and turn back on at 7am. It is easy enough for you to change the times yourself.
Do you do installations?
No we do not. We work with your installation company to ensure a smooth installation. Most of our customers use their parking, alarm, electrician, or maintenance personnel to install. We make it easy to install.
How do I buy one of these?
See the HOW TO PURCHASE tab
I have a very wide exit and can I put a sign on either side?
Yes we call this a Tandem System. We recommend if you have two or more lanes exiting, you should add another sign body. The key here is that only one sign needs a control board. This will allow both signs flashing and audio to synch with each other.
Can I change the Audio Alert Message?
Yep. The audio is stored on our VM-1 Audio Board. The VM-1 has a micro usb connection (android phone cable). You can record your own MP3 file and label 001.mp3 then connect to the VM-1 and replace the existing file. We recommend keep the message around 5 seconds. The board will replay the sound file for as long as the sign is active.
How does the sign detect a car?
The sign itself does not detect a car. A Triggering Device is connected to the sign. Usually a Triggering Device is either a parking gate, roll-up door, vehicle sensor, or motion detector. Look under the accessories tab for some choice. We can design it up for you so there is no guess work. Send us some pictures of your exit lanes.
BEST - - - This motion detector will ignore pedestrians and will only activate when a vehicle is traveling in a certain direction like exiting.
Minimal labor for installation.
Pricing $320
Good - - - This motion detector mounts on the ceiling and will detect any motion below it. Good for vehicle only areas.
Minimal labor for installation.
Pricing $100
Great - - - Loop Detectors are great at detecting vehicles and ignoring pedestrians, however, they are the most labor intensive for installations.
Expensive labor for installation.
Pricing $100
Fair - - - Beam Detectors are great at detecting vehicles, however they are not good for dual directions lanes and they will detect pedestrians.
Minimal labor for installation.
Pricing $100
Cutoff the Voice or Audio alert at designated times with this simple timer. PASS will pre-wire it into your system. The Timer is 24/7 / 365 days so weekends can have different cutoff time the weekdays.
Pricing $180
Great Idea - - - When you have a very short exit to sidewalk distance this sign will flash to STOP drivers exiting the parking lanes.
Minimal labor for installation.
Pricing $250
This post is 72"x4"x4" and is used when wall mounting is not available. It is 12AWG steel and will last for decades. It is powder coated black.
Pricing $480
Intelligent Warning Systems for parking facilities
For Product Support or Quotes :
Support@PassSigns.com
–480–689–1993–
Most of PASS Signs products are made right here in Phoenix, AZ using local vendors and employees.
